Avalon A9 POU Installation
Avalon A9 POU dispenser installation follows the same process as any POU water cooler: (1) Identify the nearest cold water supply line (typically under the kitchen sink or from a basement/utility room). (2) Install a saddle valve or angle stop tee on the cold supply. (3) Run 3/8" polyethylene tubing from the supply connection to the Avalon A9. The Avalon ships with 15 feet of supply tubing -- extend with standard 3/8" PEX tubing if placement requires more distance. (4) Connect the supply tubing to the Avalon inlet port (push-to-connect fitting). (5) Plug in and allow the tanks to fill (approximately 20 minutes). Avalon provides customer support at 1-800-656-4776.