WaterClue is reader-supported. As an Amazon Associate we earn from qualifying purchases. Amazon prices and product images are sourced live from the Amazon Product Advertising API and may not reflect current Amazon listings — confirm price and availability at Amazon before purchase. Full affiliate disclosure.

Home Master Best-hub

Best Home Master Reverse Osmosis Systems -- Full Contact Technology and UV Options

Home Master pioneered artesian remineralization and Full Contact dual-mineral contact in residential RO. This guide compares the TMAFC-ERP and TMHP to help you choose between standard and UV well-water configurations.

Updated Aug 2026 · Home Master RO Systems

Home Master is a Perfect Water Technologies brand that built its reputation on two innovations the rest of the residential RO market has since copied: Full Contact dual-remineralization (adding mineral contact both after the membrane and again after the storage tank) and the non-electric permeate pump (a pressure-differential device that cuts waste ratio from 4:1 to 2:1 without electricity). Both innovations remain standard equipment on every Home Master under-sink system.

Home Master RO lineup

ModelStagesGPDRemineralizationUVWaste ratioPrice
TMAFC-ERP775Full Contact (dual)No~2:1$349-$449
TMHP HydroPerfection975Full Contact (dual)Yes -- 11W~2:1$499-$599

Full Contact technology -- what it is and why it matters

Standard remineralization RO systems run the post-membrane permeate through a calcite cartridge once, then to the storage tank, then to the faucet. The calcite contact happens at the 5th or 6th stage and the water sits in the tank for minutes to hours before dispensing. Mineral uptake during tank residence time varies -- tanks with short residence times (high-use households) dispense less mineralized water; tanks with long residence times (low-use households or overnight) dispense more. The result is inconsistent mineral content at the faucet.

Home Master's Full Contact process adds a second mineral contact stage after the storage tank: water exits the tank, passes through a second calcite/aragonite mineral stage, and then reaches the faucet. This second contact adds a consistent mineral baseline regardless of how long water sat in the tank. Output TDS is more consistent across usage patterns -- typically 50-80 ppm from 200-400 ppm source, maintained within a tighter band than single-contact systems. Output pH runs 7.0-8.5, consistent with high-quality spring water.

Non-electric permeate pump -- how it works

Traditional RO systems drain concentrate water to the drain line at atmospheric pressure. The energy in the concentrate stream (still under system pressure) is wasted. Home Master's permeate pump (ERP = Enhanced Remineralization Pump) is a pressure-exchange device that captures energy from the concentrate stream and uses it to boost permeate (clean water) pressure entering the storage tank. This increases effective pressure differential across the membrane without electricity -- improving membrane efficiency and cutting waste from 4:1 to approximately 2:1.

The permeate pump is purely mechanical -- no electricity, no moving parts that wear, no maintenance. Home Master units with ERP have shipped with this technology for over 10 years with no documented pump-specific failure mode. It adds $30-$50 to the system cost versus non-ERP configurations and recovers the difference in water savings within 2-3 years in most markets.

TMAFC-ERP -- who it's for

The TMAFC-ERP is the right Home Master system for municipal water households that want the best-tasting RO output available without UV sterilization. The Full Contact dual-remineralization produces water that most tasters prefer over APEC ROES-PH75 or iSpring RCC7AK single-stage remineralization output -- more consistent mineral profile, slightly higher pH consistency across draws. The 2:1 waste ratio (versus 4:1 for traditional RO) is a meaningful efficiency improvement. Annual filter cost of $100-$130 is higher than APEC or iSpring but includes dual remineralization cartridges that would cost $40-$60 as add-ons to competitor systems.

TMHP HydroPerfection -- who it's for

The TMHP is the right product for well water households that need biological protection alongside chemical contaminant removal. The 11-watt UV module at the correct flow rate provides 99.99%+ bacterial reduction and 99.9%+ viral reduction -- combined with the RO membrane's physical rejection, this is the most thorough point-of-use water treatment available in a residential single-unit system. The iron/manganese pre-filter protects the membrane from fouling on well water with iron above 0.3 ppm -- a common condition in many aquifers that rapidly destroys standard RO membranes without pre-treatment.

For municipal water households: the TMHP is more system than you need. The UV module addresses biological contamination that municipal chlorination already handles. Save $150 and get the TMAFC-ERP instead.