Rheem Fury 80-Gallon Atmospheric Gas Water Heater (82V80-2)
Rheem Fury 80-Gallon Atmospheric Gas Water Heater (82V80-2) Review
The Rheem Fury 80-Gallon Atmospheric Gas Water Heater (82V80-2) is the high-capacity legacy Rheem Fury — 80-gallon atmospheric gas from the 1990s–2010s, used in 5–7 person households and light-commercial residential. Reference page for owners researching specs, parts, and modern replacements.
Why this product page exists
If you own a basement Rheem Fury 82V80-2 and want to know its age, warranty, parts compatibility, or what to replace it with when it fails — this is for you.
Headline specifications (original)
- Model: 82V80-2
- Capacity: 80 gallons
- Fuel: Natural gas, atmospheric vent
- BTU input: 76,000 BTU/h
- First Hour Delivery: 125 GPH
- Recovery: 76 GPH at 90°F rise
- EF: ~0.55
- Original warranty: 6-year
- Dimensions: 70" H × 26" diameter (large footprint)
- Status: Legacy / replacement reference
How old is your 82V80-2?
Letter-month + 2-digit-year decode in the serial number. See our Rheem age-by-serial-number page.
80G tanks are typically deployed in larger homes with predictable replacement cycles. Most 82V80-2 units in service are 12–20 years old at this point — past expected tank life. If yours is still running well, treat it as living on borrowed time.
Common parts
- Thermocouple — SP12090A, ~$25–$40
- Pilot assembly — SP12176C or SP15013, ~$60–$120
- Gas control valve — SP21176A (higher-BTU variant), ~$220–$320 (more expensive than 40G/50G valve)
- Anode rod — 48" or 54" hex-head aluminum-zinc, ~$50–$60
- T&P relief valve — 3/4" 150 psi 210°F, ~$25
- Drain valve — replace with brass at $25
Full lookup at our parts directory.
When to replace
80G tanks at year 12+ are in the high-risk zone. The thermal cycling across 80 gallons creates more anode-rod consumption, more sediment accumulation, and more shell stress than 50G tanks. End-of-life indicators are the same as the 40G/50G but tend to appear earlier in the 80G's lifecycle.
If the tank itself is leaking — even a slow drip from the shell — replace immediately. 80G shell failures can flood basements in hours.
Modern Rheem equivalents
For atmospheric 80G replacement, Rheem's current lineup tops out at 75G — see Performance Platinum 75G or Performance 75G Atmospheric. Five gallons less capacity but modernized burner and EcoNet WiFi.
For larger capacity at higher efficiency, the RTGH-95DVLN tankless at 9.5 GPM continuous flow handles equivalent or higher peak demand than an 80G tank, with operating cost cut in half.
For all-electric high-capacity replacement, ProTerra 80G Heat Pump matches the 80G capacity at one-third the operating cost.
Bottom line
The Rheem Fury 82V80-2 is the legacy high-capacity Rheem residential gas tank. Most units in service today are at or past expected end of life. Use this page to plan replacement: modern equivalents are Performance Platinum 75G (tank), RTGH-95DVLN tankless (high-efficiency), or ProTerra 80G HP (electrification). For troubleshooting active issues see our Rheem troubleshooting hub.
- Natural gas combustion — faster recovery than electric resistance at comparable tank size
- Large 80-gallon reserve — comfortably serves 5+ person households in peak-use periods
- 125-gallon first-hour rating — handles morning-rush simultaneous demand without shortfall
- Discontinued model — original warranty has expired; replacement parts availability is age-dependent
- Below-average UEF 0.55 — modern standard models reach 0.65+, condensing 0.95+
- 6-year warranty — below the 8–12 year average for premium models in this class
- Atmospheric venting requires vertical B-vent — less routing flexibility than power-vent or condensing alternatives