Woodbridge B-0960S Smart Toilet with Integrated Bidet

Woodbridge B-0960S -- the all-in-one smart toilet for modern bathrooms

The Woodbridge B-0960S is a complete elongated one-piece smart toilet with fully integrated bidet function -- not a bidet seat added onto a conventional toilet, but a unified fixture engineered from the start as a single unit. The distinction matters: integrated smart toilets have cleaner lines, no seat-to-bowl gap that traps bacteria, and a bidet system designed to work with the specific bowl geometry rather than adapted from a generic seat template. For new construction and bathroom renovations where aesthetics are a priority, the B-0960S is the logical choice over a bidet seat retrofit.

The automatic open/close lid is proximity-activated -- as the user approaches, the lid lifts automatically; when the user steps away, it closes. This hands-free operation is a genuine hygiene benefit in shared bathrooms and is particularly valued by users who manage bathrooms for elderly family members or young children. The soft-close function prevents slam on both automatic and manual closing.

Wash system and seat comfort

The B-0960S provides posterior wash, feminine wash, and a pulsating massage mode that alternates water pressure in a rhythmic pattern useful for stimulating bowel movement or relieving discomfort. Water temperature is regulated by the tankless instantaneous heating system -- water enters the heater at incoming supply temperature and exits at the user-selected temperature immediately, with no tank to deplete and no cold-water flush at the start of a wash cycle. Five water pressure levels and five temperature levels give users precise control.

The heated seat operates at three temperature settings. Comfort height bowl at 17 to 18 inches from floor to seat makes standing and sitting easier for taller users and those with knee or hip joint limitations. The warm air dryer operates at three heat settings. A built-in deodorizer with activated carbon filter neutralizes bathroom odors.

Installation and flush system

The B-0960S uses a siphonic dual flush system -- 1.0 GPF for liquid waste and 1.6 GPF for solid waste. Rough-in is 12 inches standard. The unit requires a 120V GFCI-protected outlet within reach of the toilet -- this is the primary installation consideration, as most older bathrooms do not have an outlet near the toilet and an electrician is needed to add one. Water supply connection is standard 7/8 inch compression fitting.